Each product has a varied recommended application method as shown on the product’s data sheet as well as the label of the can, which provides best results based on the purpose of the product.
The following methods of application may apply:
Brush Application
Apply thinly and evenly along the wood grain with a firm, high quality brush and spread well. Remove any surplus or excess with a dry cloth. Usually 1-2 thin coats are required.
Roller application
Apply thinly and evenly along the wood grain with a microfibre roller and spread well. Remove any surplus or excess with a dry cloth. Usually 1-2 thin coats are required.
Cloth Application
Apply with a dry, lint-free cloth – thinly, throughly and evenly along wood grain. Remove any surplus or excess with a dry cloth. Usually 3-4 thin coats are required. Please sure to dispose of the cloth safely to avoid ignition.
Spray Application
Apply with either a customary spray gun (nozzle 1.2-1.5mm, 1.8-2.5 bar), an airless or HVLP equipment. Apply swiftly in vertical sections along the wood grain.
Buffing Application
Spread the finish evenly with a brush, roller or wide paint scraper or an Osmo Scraper. Wait approx. 30-60 minutes for the oil to absorb. Buff the surface with a single-disc machine using a white pad. Apply second coat spreading the finish evenly across the surface using a white pad. 2-3 coats may be required depending on the product being used.
Always trial apply!
