Natural Oil Woodstain Colour Ranges
Purchase Natural Oil Woodstain in any of the following colour ranges.
Osmo Standard Colours Elements® Colours RAL Colours NCS 2050 Colours BS 4800 Colours Alternative Colours
£11.79
PLEASE NOTE: Once an order for a mixed colour has been placed, it cannot be cancelled or refunded. We kindly ask customers to ensure their selections are final before proceeding with the purchase.
Purchase Natural Oil Woodstain in any of the following colour ranges.
Osmo Standard Colours Elements® Colours RAL Colours NCS 2050 Colours BS 4800 Colours Alternative Colours
Sample cans of 125ml are available to help confirm your colour choice.
Colours displayed online cannot be used as an accurate representation of colour. The colour appearance may also vary depending on surroundings. The finished surface and product coverage is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Satin and Matt.
Osmo Flat Brush or Osmo Microfibre Roller
Exterior wood surfaces
One coat, when signs of wear become visible
125ml, 750ml, 2.5L.
First coat: 4-6 hours, Second coat: 12 hours
Osmo Brush Cleaner
26m²/L with one coat
2 coats
Osmo Spray Cleaner
Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.
If possible, please apply the first coat to all sides before installation.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.
Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.
For renovation works, one coat applied to the clean and dry surface is usually sufficient.
Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight.
Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.
Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original colour tone.
Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.
Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.
Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Download the PDF product information and safety data here:
Download the PDF data here:
For all other wood types not mentioned, always trial apply first.
For the following wood types, WR Base Coat is recommended before use.
For the following wood types, a weathering period is recommended. New or sanded wood requires at least 12 weeks (approximate) exposure to the exterior elements before application.
After the weathering period, it’s generally recommended to de-grey the surface with Osmo Wood Reviver Power-Gel and clean the surface from the extractive content before application, always trial apply!
For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Please contact us for further information.
© 2020 — Osmo UK.
Osmo UK is the trading name of Woodex Limited.