Wood Wax Finish Colour Ranges
Purchase Wood Wax Finish in any of the following colour ranges.
Osmo Standard Colours Elements® Colours RAL Colours NCS 2050 Colours BS 4800 Colours
£122.89
PLEASE NOTE: Once an order for a mixed colour has been placed, it cannot be cancelled or refunded. We kindly ask customers to ensure their selections are final before proceeding with the purchase.
Purchase Wood Wax Finish in any of the following colour ranges.
Osmo Standard Colours Elements® Colours RAL Colours NCS 2050 Colours BS 4800 Colours
Sample cans of 125ml are available to help confirm your colour choice.
Colours displayed online cannot be used as an accurate representation of colour. The colour appearance may also vary depending on surroundings. The finished surface and product coverage is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Satin only. View all colours!
TRANSPARENT FINISH(one coat only)
Transparent Colours (two coats), Intensive Colours, Elements Colours, RAL Colours, NCS Colours, BS Colours
OPAQUE FINISH (two coats)
Intensive Colours, Elements Colours, RAL Colours, NCS Colours, BS Colours
Osmo Flat Brush, Hand Pad or Osmo Microfibre Roller
Protection and decorative finishing of wood in indoor areas
One coat, when signs of wear become visible
125ml, 375ml, 750ml, 2.5L
24 hours
Osmo Brush Cleaner
24m²/L with one coat
2 coats, or flooring only 1 coat plus top coat of Polyx-Oil
Osmo Spray Cleaner
The wood surface must be clean, dry and frost-free (max. 18% moisture content). Osmo Wood Wax Finish is ready to use. Do not thin. Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
Sand wood surface carefully, begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240.
Before applying oils, remove sanding dust from the surface by sweeping or vacuuming.
If possible, please apply the first coat to all sides before installation.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Transparent colour (one coat): with Osmo Flat Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well.
For a more subtle stained effect, apply thinly with a lint-free cloth and within 20 minutes, wipe away cleanly and evenly. Ventilate well while drying.
Intensive colour (two coats): with Osmo Flat Brush or Microfibre Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well. Ventilate well while drying. Apply the second coat – also thinly.
Note: Larger areas can also be coated by using a scraper. Afterwards rub in with a white pad.
Important: For mechanically loaded areas, e.g. flooring, we recommend max. one coat and generally a thin top coat with clear Osmo Polyx®-Oil Original. For white flooring, a top coat with lightly white pigmented Osmo Polyx®-Oil Tints 3040 White. Drying time of Wood Wax Finish used on floors, approx. 24 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Ventilate well while drying. After 2-3 weeks, the floor surface is fully cured.
In general, intensive colour applications (two coloured coats) are not recommended for flooring due to the risk of applying too much product.
Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.
Choose colour tones that match the natural tone of wood or a darker colour tone (trial application).
Oils enhance the natural colour tone of wood (permanent wet effect).
For dark and extractive-rich hardwoods (e.g. Wenge, Mahogany, Merbau etc.), we recommend applying Osmo Wood Wax Finish Clear Extra Thin. Trial application is recommended.
Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.
Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.
Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Download the PDF product information and safety data here:
Download the PDF data here:
For all other wood types not specified, always trial apply.
The wood species below are not recommended for Polyx-Oil Original. Please use Osmo Wood Wax Finish Extra Thin instead.
Microfibre roller and 60mm natural bristle brush set to ensure high coverage allowing you to apply thinly, thoroughly and evenly along the wood grain and spread well. For first application, two coats is recommended onto a clean and dry surface. For renovation, just one coat is necessary.
Made with 100% natural bristles with soft tips which gives fine control in achieving the desired effect. Make short work of large areas with exceptional coverage capacities to produce professional looking results every time. With a high quality beech frame and robust backing plate, simply attach the Osmo extendable telescopic handle for applying in comfort.
Made with microfibres to ensure high coverage allowing you to apply thinly, thoroughly and evenly along the wood grain and spread well. For first application, two coats is recommended onto a clean and dry surface. For renovation, just one coat is necessary.
© 2020 — Osmo UK.
Osmo UK is the trading name of Woodex Limited.