| Products | WR Base Coat

WR BASE COAT

 

EVEN MORE PROTECTION


Ideal as extra protection for softwood species for the exterior. A clear wood impregnation which serves as a preventive protection against blue stain, rot and insect attack. Penetrates deeply into the wood - prevents swelling and shrinkage and is extremely water repellent with a very low odour during application and is completely odourless when dry.

INFORMATION


  • Approx. coverage: 5-6m²/L with one coat
  • No. of coats: 1
  • Application temperature: +5°C
  • Drying time:  12hrs.
  • Sizes: 0.125L, 0.750L, 2.5L

ADVANTAGES


  • Extremely water repellent
  • Resistant to blue stain, rot and insect attack
  • Reduces wood swelling and shrinkage
  • No future application necessary

OSMO NATURAL BRISTLE BRUSH


Made with 100% natural bristles with soft tips which gives fine control in achieving the desired effect. Exceptional coverage capacities which produce professional looking results every time. Available in 25, 50, 60 and 100 mm sizes.

How-to Video


OSMO SMALL ROLLER SET


Microfibre roller and 60mm natural bristle brush set to ensure high coverage allowing you to apply thinly, thoroughly and evenly along the wood grain and spread well. For first application, two coats is recommended onto a clean and dry surface. For renovation, just one coat is necessary.

How-to Video

TIPS


  • WR Base Coat is not a wood finish and is a base coat only. A finishing product from the Osmo range is required within three months.
  • If possible, although not essential; apply to all sides of the wood to give the strongest protection. Wipe excess from edges with a dry cloth before leaving to dry.
  • Some applications may raise the wood's grain, if neccessary de-nib to smoothen the surface.
  • Use biocides safely. Always read the label and product information before use.
  • Note: 4005 WR Base Coat Aqua is discontinued from 2016 and is superceded with an improved oil-based version 4001 WR Base Coat.