Renovation
Wood Care and Maintenance.
Care the right way for your newly oiled surfaces and revive tired wood.
Exterior Renovation
How to refresh your old exterior wood
Apply Osmo’s Wood Reviver Power Gel in the direction of the wood grain. Wait for approximately 20 minutes, clean and rinse with plenty of water.
After approx. 48 hours drying time, protect the now fresh-looking wood permanently with a finish such as Osmo Natural Oil Woodstain.
Renovate Garden Furniture
How to maintain your garden furniture with Osmo
Use the Garden Maintenance Kit to apply Osmo’s Wood Reviver Power Gel in the direction of the wood grain. Wait for approximately 20 minutes, clean and rinse with plenty of water.
After approx. 48 hours drying time, protect the now fresh-looking wood permanently with a finish such as Osmo One Coat Only or Teak Oil Spray.
Spot Repairs
How to partially renovate a small area
For small scratches apply a small amount of oil (5ml sachets are perfect for this) onto the damaged area, and rub with a scotch pad or cloth. Leave for a minute or so, and wipe any excess off with a dry cloth.
For deeper scratches simply cordon off the damaged board/plank(s) of wood, and sand to remove the bulk of the scratch using sandpaper, the grit you use depends on the extent of the scratch. Finish with 120 grit and re-apply Polyx-Oil. It is important to apply two coats when sanding back to the bare wood surface.