Custom mix from a range of 120 colours at your nearest Osmo Supplier store with a Tinting System.
The colour range is inspired by the four elements of nature; air, earth, fire and water. Order the printed Elements® Colour Card for free, for a true colour match representation before your purchase.
More than 2000 additional opaque colours are available to choose from. RAL Classic and BS 4800 colours are available immediately.
NCS, RAL Design, and many more are available upon request. Please note pearl, luminous, and metallic colours are not possible at this time.
Match almost any colour including designer brands, RAL, BSC, NCS colours and more. Simply visit your local stockist with an Osmo Tinting System installed and ask for your mix of any colour as desired.
Match your colour for both indoor and outdoor!
OPAQUE (two coats)
Elements® Colours, RAL Colours, NCS Colours, and BS Colours.
All Country Shades colours are only available when mixed in selected stores, via the Osmo Tinting System.
Exterior wood surfaces
125ml, 750ml, 2.5L.
125ml sample cans are available to to help confirm your colour choice. Colours displayed on the printed Elements® Colour Card provide an accurate representation of colour within tolerance of batch production. However, the colour appearance may vary depending on surroundings. The finished surface and product coverage is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Osmo Flat Brush or Osmo Microfibre Roller
12 hours
One coat, when signs of wear become visible
Osmo Brush Cleaner
26m²/L with one coat
2 coats
Osmo Spray Cleaner
Country Shades is also available in any colour of your choice. Starting from samples of 0.125 litres per colour tone, mix to any colour from any RAL, NCS and BS colour charts, and many more.
Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.
Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Shades is ready to use. Do not thin. Stir well before use.
If possible, please apply the first coat to all sides before installation.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface and product coverage is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient.
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.
Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Download the PDF product information and safety data here:
Download the PDF data here:
For all other wood types not mentioned, always trial apply first.
For the following wood types, WR Base Coat is recommended before use.
For the following wood types, a weathering period is recommended. New or sanded wood requires at least 12 weeks (approximate) exposure to the exterior elements before application.
After the weathering period, it’s generally recommended to de-grey the surface with Osmo Wood Reviver Power-Gel and clean the surface from the extractive content before application, always trial apply!
For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Please contact us for further information.
Made with high quality synthetic bristles with soft tips which gives fine control in achieving the desired effect. Exceptional coverage capacities which produce professional looking results every time. Available in 25, 50, 60 and 100 mm sizes.
Microfibre roller and 60mm natural bristle brush set to ensure high coverage allowing you to apply thinly, thoroughly and evenly along the wood grain and spread well. For first application, two coats is recommended onto a clean and dry surface. For renovation, just one coat is necessary.
Top Tips:
Additional Information:
Ideal Protection Against Dirt & Stains
Restoration of greyed and aged outside wood
Removes contaminants from WPC
© 2020 — Osmo UK.
Osmo UK is the trading name of Woodex Limited.
