Hardener for Oil Stain
Special Additive for Quick Drying
- Shortened drying time for Oil Stain
- For high traffic areas
- Ideal for commercial and public buildings
Osmo Hardener for Oil Stain acts as an additive for Osmo Oil Stain for accelerated drying. The drying time is shortened from 12 hrs to just 4 hrs by simply pouring the contents of the hardener (60ml) into the 1L Oil Stain can and stirring thoroughly prior to application.
Preparations before use of Osmo Oil Stain are not influenced by the application of the hardener additive.
These are valid without any restrictions. For this purpose, please observe the product information for Osmo Oil Stain. The finished surface is influenced by several factors, including the condition of the wood.
Therefore, a trial application is always required, especially for unfamiliar surfaces.
Methods of Application
Add Osmo Hardener for Oil Stain completely to the can of Oil Stain (1.0 litre) and stir so that both components are mixed well. Further processing to be carried out corresponds to that of Oil Stain.
Note: Pot time is reduced down to 60 minutes by add-ing the Hardener. Please do not mix together more material than you can process with certainty within 45 minutes. If you do not use the entire can of Oil Stain, add 6% Hardener – mix in a separate container!
Pot time is reduced down to 60 minutes by adding the Hardener. Please do not mix together more material than you can process with certainty within 45 minutes.
OSMO OIL STAIN
Colour and protect wooden floors without visible transitions, applying a single coat of the Oil Stain will create a transparent look showing the wood’s natural grain, whilst an optional second coat can give a more intensive colour tone. A clear final coat of Osmo Polyx®-Oil 2K is a must to protect pigmented finishes from wearing the colour. Oil Stain Hardener is an optional second component which can be used to harden the finish which reduces the drying and curing time to just 4 hours!
- Pot time is reduced down to 60 minutes by adding the Hardener. Please do not mix together more material than you can process with certainty within 45 minutes. If you do not use the entire can of wood finish, add 6 % Hardener – mix in a separate container.
- A top coat of Osmo Polyx®-Oil 2K is always required when using Oil Stain.
- Product Code: 6631
- Drying time: 4 hrs
- Sizes: 60 ML
Osmo Door-Oil is a unique oil and wax combination designed to protect interior veneered wooden doors. The unique formulation penetrates the wood surface which remains microporous and whilst the finish will not crack, peel, flake or blister. The surface also becomes healthy and elastic, and the wood’s fibres are prevented from becoming dry and brittle over time as well as shrinking and swelling.