For professional machine application only
- A two-part flooring oil for professional, machine application only
- Ideal for all sanded parquet, block strip, plankwood flooring and more
- Ideal for high traffic areas
- Dries to a clear, satin-matt finish
- Based on a blend of natural oils and waxes
- Safe for humans, plants and animals when dry
- Free of solvents and water
Overview
Clear, satin and fast drying wood finish for professional users.
Osmo Polyx®-Oil 2K Pure is free of solvents and water. The finished surface is resistant to dirt, water and abrasion and smoothened. In comparison to conventional finishes, the use of plant ingredients creates a more evenly coloured and more harmonious appearance.
Simple application – without primer or intermediate sanding – this saves time and money. Suitable for wood; microporous surface does not crack, peel, flake or blister. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A – no water spots. When dry, finish is safe for humans, animals and plants and is suitable for children‘s toys as per EN 71.3 (European norm) and is resistant to saliva and perspiration according to DIN 53160 (German industrial norm). Polyx®-Oil 2K Pure was developed for mechanical applications.
Finishes
Clear
Application Tools
Floor-X-Centre
Recommended Use
Interior wooden flooring and furniture
Recoat
One coat, when signs of wear become visible
Sizes
1L
Dry Time
4 hours
Clean Up
Osmo Brush Cleaner
Coverage
40-50m²/L with one coat
Coats
1-2 coat
Care
Osmo Wash and Care, or Spray-Mop
Surface Preparation
Wood surface must be clean, dry and frost-free (moisture content max. 12%). Osmo Polyx®-Oil 2K Pure is not ready to use. Shortly before the application, add the hardener. Please ensure that the packaging of the hardener is completely emptied and that both components are mixed thoroughly. Please do not thin.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum.
The finished surface is influenced by several factors, including the wood‘s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Method of Application
Apply thinly to the clean and dry wood along the wood grain with Osmo Double Blade Scraper and spread well.
Allow wood to absorb the product for approx. 30-60 minutes and afterwards massage into wood with a single disc machine with a green pad. Directly afterwards, apply the second coat with a scraper (wet-inwet), allow to it absorb and massage in.
Subsequently even out with a single disc machine with a white pad. Allow surface to dry.
If the single disc machine leaves streaks, we recommend turning the pad over, cleaning or replacing it.
Attention: 4-6 hours after adding the hardener, the mixture is to be used no longer (pot time).
Note
Polyx®-Oil 2K Pure “Component A” can be used solely with the hardener which was developed for it. Leftover already mixed product cannot be stored and reused.
Attention: 4-6 hours after adding the hardener, the mixture is to be used no longer (pot time).
Wood surfaces treated with Polyx®-Oil 2K Pure are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary. If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Care
Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Download the PDF product information and safety data here:
Coverage
1 litre covers approx. 40-50 m² with one coat.
Product coverage depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to reduced coverage.
Drying Time
Dry to light traffic after approx. 4 hours. Completely hardened and furniture can be replaced after 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity).
Lower temperatures and/or higher air humidity can increase the drying time. Allow for good ventilation while drying.
Sizes
1.0 L (Polyx®-Oil 2K 0.9 L and Hardener 0.1 L)

OSMO FLOOR-X-CENTER
Ideal machine which uses eccentric rotation for basic and intensive cleaning of wooden floors. Can also be used for resurfacing and refreshing the surface, as well as application of the Osmo Polyx®-Oils and Osmo Oil Stain.
