Garden Furniture Maintenance Kit

Surface Preparation – Wood Reviver Power Gel

Remove coarse dirt from greyed wood; afterwards dampen with water.
Wood Reviver Power Gel is ready to use, do not thin.
Perform a trial application before treating wood with Wood Reviver Power Gel.

Method of Application – Wood Reviver Power Gel

Apply the gel generously along the wood grain. After approx. 20 minutes clean with a hard brush and rinse with a lot of water. After approx. 48 hours drying time, protect the now newly refreshed wood with a wood finish (e.g. Osmo Natural Oil Woodstain, Decking-Oils, Country Colour).

For mechanical processing on decking, we recommend using Osmo Decking and Flooring Cleaner.

Note – Wood Reviver Power Gel

Protect metal (e.g. hinges) and plants against direct contract (e.g. cover ornamental and farm plants with a tarpaulin.)

Surface Preparation

Wood surface must be clean, dry and frost-free (moisture content max. 20%).

Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Hard wood containing natural wood ingredients needs to weather off (for approximately 4 weeks) or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).

The finished surface is, among other things, influenced by the wood‘s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Care

Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.