Step 1 of 3
Wood ReviverPower Gel
If Necessary, To Restore Wood
If necessary, we recommend restoring the wood’s natural colour and character again with Wood Reviver Power Gel.
Simply dampen the wood surface with water, then generously apply the gel along the wood grain. After approximately 20 minutes reaction time, clean the surface with an Osmo Decking Cleaning Brush and rinse with plenty of water.
For severely aged wood, several applications may be necessary. It may be advantageous in some cases to sand the surface instead, and in this instance a weathering period afterward would be additionally recommended.
For more product information and detailed instructions, view product today.
View Product
Step 2 of 3
UV-Protection OilTints
Any Colour in a Satin Finish
Choose from a selection of lightly tinted colours.
Choose the 420 Extra base which contains active ingredients to protect the coating against mould, algae and fungal attack.
Firstly, it's good practice to clean the dried wood surface with methylated spirits to remove any remaining wood extractives.
Then, apply thinly two coats using a brush, removing any excess before leaving to dry.
Please always trial apply!
View Product
Please Note: This product is mixed instore via an Osmo Supplier that has a Tinting System.
Tinting System
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Exterior
Surface:Garden Furniture and Other Mixed Dimensional Wooden Structures
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, Pressure Treated Wood, or Other wood species of tropical origin
Wood Condition:Old or aged, untreated wood
Advisory:I understand that I need to choose a colour, because clear finishes do not offer UV-resistance on flat horizontal surfaces where rain can remain on the surface for long periods of time.
Requirement:A colour that protects the wood
Colour Type:A colour with additional protection, especially recommended for softwoods
Colour Opacity:A lightly tinted colour (wood grain and character remains visible and highly influences the final result)
Recommendation:See above for products and advice